SINGLE-SIDE : |
Laminate : FR-4 |
Pcb Thickness :1.6 mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 Microns/35 Microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole : 0.40mm (16 Mils) FINISH |
Min. SMD Pitch : 0.5mm (20 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request
|
|
DOUBLE-SIDE : |
Laminate : FR-4 |
Pcb Thickness :1.6mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 Microns/35 Microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole: 0.30mmn (12 Mils) (FINISH) |
SMD Pitch : 0.50mm (20 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. |
Routing : Simple routing with 2.4 mm (0.094") router |
Holes in the ground area shall be PTH only.
|
|
ML-4 : |
Laminate : FR-4 |
Pcb Thickness :1.6 mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 microns/35 microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole : 0.30mm (12 Mils) (FINISH) |
SMD Pitch : 0.50mm (20 Mils) |
Inner Clearance : 0.40mm (16 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. |
Routing : Simple routing with 2.4 mm (0.094") router
|
Holes in the ground area shall be PTH only.
|
|
ML-6 : |
Laminate : FR-4 |
Pcb Thickness :1.6 mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 microns/35 microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole : 0.30mm (12 Mils) (FINISH) |
SMD Pitch : 0.50mm (20 Mils) |
Inner Clearance : 0.40mm (16 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. |
Routing : Simple routing with 2.4 mm (0.094") router
|
Holes in the ground area shall be PTH only.
|
|
ML-8 : |
Laminate : FR-4 |
Pcb Thickness :1.6 mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 microns/35 microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole : 0.30mm (12 Mils) (FINISH) |
SMD Pitch : 0.50mm (20 Mils) |
Inner Clearance : 0.40mm (16 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. |
Routing : Simple routing with 2.4 mm (0.094") router
|
Holes in the ground area shall be PTH only.
|
|
ML-10 : |
Laminate : FR-4 |
Pcb Thickness :1.6 mm/2.4mm/3.2mm |
Start Copper Thickness : 17.5 microns/35 microns/70 microns |
Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils) |
Min. Hole : 0.30mm (12 Mils) (FINISH) |
SMD Pitch : 0.50mm (20 Mils) |
Inner Clearance : 0.40mm (16 Mils) |
Solder mask : Green |
Surface Finish :Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold |
Legend : White |
Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. |
Routing : Simple routing with 2.4 mm (0.094") router
|
Holes in the ground area shall be PTH only.
|
|
